WP_Cloudy

Timetable

June 2018
M T W T F S S
« May    
 123
45678910
11121314151617
18192021222324
252627282930  
  • polished Comments Off
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements

    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case is highly polished with thinner. Crew-able bottom frame and. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 14.65 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer another similar case, which is. Engraved in the middle part. Also on offer further. 6 similar type of cases. 2 fully engraved, one with. Crystal and one with both mineral crystals. Engraved and one highly polished. Thickness: 17.50 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “H. POLISHED WRISTWATCH CASES WITH THIN BOTTOM FRAME FOR POCKET WATCH MOVEMENTS” is in sale since Wednesday, January 24, 2018. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Type of Part: Wristwatch Cases
    • Brand: Watches Reborn
    • MPN: Does Not Apply

    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements

    Tags: , , , , , , , ,

  • engraved Comments Off
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements

    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This engraved in the middle part case is with thinner. Crew-able bottom frame and. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 14.65 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer another similar case, which is highly polished. Also on offer further. 6 similar type of cases. 2 fully engraved, one with. Crystal and one with both mineral crystals. Engraved and one highly polished. Thickness: 17.50 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES WITH THIN BOTTOM FRAME FOR POCKET WATCH MOVEMENTS” is in sale since Wednesday, January 24, 2018. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Type of Part: Wristwatch Cases
    • Brand: Watches Reborn
    • MPN: Does Not Apply

    Engraved Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements

    Tags: , , , , , , , ,

  • 49mm Comments Off
    49mm STEEL Grade 316L CASE f INSERTING OF pocket watch movements Omega Doxa etc

    49mm STEEL Grade 316L CASE f INSERTING OF pocket watch movements Omega Doxa etc
    Steel Case Doxa, Zenith. STAINLESS STEEL GLAZED Case with GLASS BACK for inserting of the lepine (pocket watch) movements. Stainless Steel – Grade 316L. Polished or matte finish. Glazed on both sides with mineral glass; front slightly curved, bottom flat. 49 mm length from lugs to lugs appr. 57 mm lugs width appr. 22 mm For other measures see diagrams below. This Case fit pocket watch movements as JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega etc with the diameter 42 – 44 mm. The wrist watches on the pictures are not for sale. EDELSTAHLGEHÄUSE mit GLASBODEN zum Einbau von Lepine Taschenuhrwerken. Beidseitig mit Mineralglas verglast; vorne leicht gewölbt, Rückseite flach. Durchmesser ist von ca. 49 mm Länge inkl. 57 mm Bandanstoßbreite ca. 22 mm weitere Abmessungen finden Sie in den Abbildungen unten. Das Gehäuse ist zum Einbau von Lepine Taschenuhrwerken wie JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega usw. Mit Durchmesser von ca. 42 – 44 mm. Die abgebildeten Armbanduhren stehen nicht zum Verkauf. Als Verbraucher können Sie den Kauf ohne Angaben von Gründen innerhalb eines Monats widerrufen. Muster, nicht zum Verkauf / Samples, not for sale. The item “49mm STEEL Grade 316L CASE f INSERTING OF pocket watch movements Omega Doxa etc” is in sale since Saturday, February 04, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Watches for Parts”. The seller is “yevgen62″ and is located in Langenhagen. This item can be shipped worldwide.
    • ATTENTION: case is NOT pre-drilled for crown or pusher

    49mm STEEL Grade 316L CASE f INSERTING OF pocket watch movements Omega Doxa etc

    Tags: , , , , , , , , , ,

  • partially Comments Off
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    Partially Engraved Wristwatch Cases For Pocket Watch Movements

    Partially Engraved Wristwatch Cases For Pocket Watch Movements
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This casEs are partially engraved and have both mineral crystals. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 3 other similar cases. 1 fully engraved with top sapphire crystal (scratch resistant) , 1 highly polished, two partially engraved and 1 f. Ully engraved all 4 with. Top and bottom mineral crystals. We offer further 2. Similar type of cases. (one partially engraved and one highly polished) are with thinner screw-able bottom frames , both with. Op and bottom mineral crystals. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “PARTIALLY ENGRAVED WRISTWATCH CASES FOR POCKET WATCH MOVEMENTS” is in sale since Wednesday, January 24, 2018. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Other Watches”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Brand: Watches Reborn
    • MPN: Does Not Apply
    • Features: Screwed bottom frame
    • Gender: Unisex
    • Movement: No Movement

    Partially Engraved Wristwatch Cases For Pocket Watch Movements

    Tags: , , , , , ,

  • polished Comments Off
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements

    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case is highly polished with both mineral crystals. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 6 other similar cases, all with top and bottom mineral crystals. One is fully engraved with. One fully engraved with both mineral crystals, and. Two partially engraved also with. Further 2 cases (one partially engraved and one highly polished) are with. Thinner screw-able bottom frames. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “HIG. POLISHED WRISTWATCH CASES WITH MINERAL CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, July 29, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Type of Part: Wristwatch Cases
    • Brand: Watches Reborn
    • MPN: Does Not Apply

    Hig. Polished Wristwatch Cases With Mineral Crystals For Pocket Watch Movements

    Tags: , , , , , , ,

  • 47mm Comments Off
    47mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 42-44mm

    47mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 42-44mm
    STAINLESS STEEL GLAZED CASE for inserting of the lepine (pocket watch) movements with GLASS BACK. Stainless Steel – Grade 316L. 3 pieces, glazed on both sides with mineral glass. 47,7 mm length from lugs to lugs appr. 70 mm lugs width appr. 22 mm For other measures see diagrams below. This case fit pocket watch movements as JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega etc with size 42 – 44 mm. The wrist watches on the pictures are not for sale. EDELSTAHLGEHÄUSE mit GLASBODEN zum Einbau von Lepine Taschenuhrwerken. Hochglanzpolierte oder Matte Ausführung. 3 teilig, beidseitig mit Mineralglas verglast. Durchmesser ist von ca. 47,7 mm Länge inkl. 70 mm Bandanstoßbreite ca. 22 mm weitere Abmessungen finden Sie in den Abbildungen unten. Das Gehäuse ist zum Einbau von Lepine Taschenuhrwerken wie JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega usw. Mit Durchmesser von ca. 42 – 44 mm. Die abgebildeten Armbanduhren stehen nicht zum Verkauf. Als Verbraucher können Sie den Kauf ohne Angaben von Gründen innerhalb eines Monats widerrufen. Weitere Infos dazu und unsere AGB finden Sie auf unserer m ich -Seite. You can read at German policy details on a m e -site. Gegen Aufpreis können Sie noch eine Aufzugskrone und einen Drücker bekommen. Fragen Sie bitte den Verkäufer. Die Kronen sind mit Durchmesser von 8,3mm und von 9,5mm und in polierter und mattierter Ausführung erhältlich. The crowns are available with a diameter of 8.3 mm and 9.5 mm and as polished or matte versions. The pushers are as matte and polished available. The item “47mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 42-44mm” is in sale since Friday, March 31, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Watches for Parts”. The seller is “yevgen62″ and is located in Langenhagen. This item can be shipped worldwide.
    • ATTENTION: case is NOT pre-drilled for crown or pusher

    47mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 42-44mm

    Tags: , , , , , , , , ,

  • engraved Comments Off
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements

    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case is beautifully engraved and has got both mineral crystals. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 6 other similar cases, all with top and bottom mineral crystals. One is fully engraved with top sapphire crystal (scratch resistant), one highly polished and two partially engraved, all 3 with top and bottom mineral crystals. Further 2 cases (one partially engraved and one highly polished) are with thinner screw-able bottom frames. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES WITH MINERAL CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, July 29, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Other Watches”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Brand: Watches Reborn
    • MPN: Does Not Apply
    • Features: Screwed bottom frame
    • Gender: Unisex
    • Movement: No Movement

    Engraved Wristwatch Cases With Mineral Crystals For Pocket Watch Movements

    Tags: , , , , , , ,

  • 46mm Comments Off
    46mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 38-40mm

    46mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 38-40mm
    STAINLESS STEEL GLAZED CASE with GLASS BACK for inserting of the lepine (pocket watch) movements. Stainless Steel – Grade 316L. 3 pieces, glazed on both sides with mineral glass. 46 mm length from lugs to lugs appr. 68 mm lugs width appr. 20 mm For other measures see diagrams below. This case fits pocket watch movements as Longines, Tavannes, System Glashütte etc with 38-40mm diameter und height till 8mm. The wrist watches on the pictures below is not for sale. EDELSTAHLGEHÄUSE mit GLASBODEN zum Einbau von Lepine Taschenuhrwerken zum Einbau von Taschenuhrwerken. 3 teilig, beidseitig mit Mineralglas verglast. Durchmesser ist von ca. 46 mm Länge inkl. 68 mm Bandanstoßbreite ca. 20 mm weitere Abmessungen finden Sie in den Abbildungen unten. Das Gehäuse ist für Taschenuhrwerke wie Longines, Tavannes, System Glashütte usw mit einem Durchmesser von ca. 38 – 40mm und Höhe bis 8mm. Die abgebildeten Armbanduhren stehen nicht zum Verkauf. Als Verbraucher können Sie den Kauf ohne Angaben von Gründen innerhalb eines Monats widerrufen. Weitere Infos dazu und unsere AGB finden Sie auf unserer m ich -Seite. You can read at German policy details on a m e -site. The pushers are as matte and polished available. The item “46mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 38-40mm” is in sale since Sunday, March 18, 2012. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Wristwatches”. The seller is “yevgen62″ and is located in Langenhagen. This item can be shipped worldwide.
    • Brand: Unbranded
    • MPN: Does Not Apply
    • Band Material: Stainless Steel
    • Lug Width: 22mm
    • Year of Manufacture: 2010-Now
    • ATTENTION: case is NOT pre-drilled for crown or pusher
    • CustomTag_0: case is NOT pre-drilled for crown or pusher

    46mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 38-40mm

    Tags: , , , , , , , , ,

  • engraved Comments Off
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements

    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case has a benefit of top sapphire (scratch resistant) crystal and is beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 6 other similar cases, all with top and bottom mineral crystals. One is fully engraved, two partially engraved and one highly polished. Further 2 cases (one partially engraved and one highly polished) are with thinner screw-able bottom frames. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES WITH TOP SAPPHIRE CRYSTAL FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, July 29, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Type of Part: Wristwatch case
    • MPN: Does Not Apply
    • Brand: Watches Reborn

    Engraved Wristwatch Cases With Top Sapphire Crystal For Pocket Watch Movements

    Tags: , , , , , , ,