WP_Cloudy

Categories

Timetable

June 2019
M T W T F S S
« May    
 12
3456789
10111213141516
17181920212223
24252627282930
  • vintage Comments Off
    Vintage-P-W-UNSIGNED-ENGLISH-FUSEE-ORIGINAL-PAIR-CASES-HALMARKED-1821-1822-01-ycp Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822

    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822
    This interesting and very early example of an English Fusee bears hallmarks for Chester c. 1821-22, unsigned movement but believed to be a Liverpool work, case maker’s marking E. , very attractive and deep floral engraving to the balance cock, key winding and setting with key included, movement has its roller with passing flat and not crescent, and both banking pins on the same side of the lever. This would be an excellent opportunity for a watchmaker to overhaul and end up with 200 year old rarity. The item “Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822″ is in sale since Sunday, June 9, 2019. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Pocket Watches\Antique”. The seller is “dav.nfhgl” and is located in Ferrysburg, Michigan. This item can be shipped worldwide.
    • Number of Jewels: 6 Jewels
    • Modified Item: No
    • Country/Region of Manufacture: United Kingdom
    • Escapement Type: Pair Cases
    • Pocket Watch Size: 55mm
    • Material: Silver
    • Movement: Mechanical (Hand-winding)
    • Year of Manufacture: 1820-1829
    • Features: English Fusee
    • Closure: Open Face, Original Pair Cases
    • Brand: Unsigned, Likely Liverpool Work
    • Serial Number: #111

    Vintage P/W UNSIGNED ENGLISH FUSEE ORIGINAL PAIR CASES HALMARKED 1821-1822

    Tags: , , , , , , , ,

  • vintage Comments Off
    Job-Lot-Vintage-Antique-Sterling-Silver-Pocket-Watch-Cases-Repair-Scrap-01-pif Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap
    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap
    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap
    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap
    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap
    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap
    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap
    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap

    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap
    JOB LOT VINTAGE / ANTIQUE STERLING SILVER POCKET WATCH CASES- REPAIR SCRAP.. SEE PHOTOS TO SEE WHATS THERE,, APPROX 350GR.. The item “JOB LOT VINTAGE / ANTIQUE STERLING SILVER POCKET WATCH CASES- REPAIR SCRAP” is in sale since Thursday, May 30, 2019. This item is in the category “Antiques\Silver\Solid Silver\Pocket Watches/Chains/Fobs”. The seller is “thefatwilly” and is located in fochabers, Moray. This item can be shipped worldwide.
    • Age: 1900-1940
    • Composition: Sterling Silver
    • Featured Refinements: Sterling Silver Pocket Watch

    Job Lot Vintage / Antique Sterling Silver Pocket Watch Cases- Repair Scrap

    Tags: , , , , , , , ,

  • polished Comments Off
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements

    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case is highly polished with thinner. Crew-able bottom frame and. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 14.65 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer another similar case, which is. Engraved in the middle part. Also on offer further. Similar type of cases. 2 fully engraved, one with. Crystal and one with both mineral crystals. Thickness: 17.50 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “H. POLISHED WRISTWATCH CASES WITH THIN BOTTOM FRAME FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, February 23, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Type of Part: Wristwatch Cases
    • Brand: Watches Reborn
    • MPN: Does Not Apply
    • Country/Region of Manufacture: United Kingdom
    • Modified Item: No

    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements

    Tags: , , , , , , , ,

  • engraved Comments Off
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case is beautifully engraved and has got both mineral crystals. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases both with top and bottom mineral crystals. One is fully engraved of the same size. Thinner screw-able bottom frames. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES FOR POCKET WATCH MOVEMENTS, TOP SAPPHIRE CRYSTAL” is in sale since Saturday, February 23, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Type of Part: Wristwatch Cases
    • Brand: Watches Reborn
    • MPN: Does Not Apply
    • Country/Region of Manufacture: United Kingdom
    • Modified Item: No

    Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

    Tags: , , , , , , ,

  • vintage Comments Off
    Vintage Pocket Watches Waltham Big Lot Gold Filled Cases Parts Fix Scrap Gold
    Vintage Pocket Watches Waltham Big Lot Gold Filled Cases Parts Fix Scrap Gold
    Vintage Pocket Watches Waltham Big Lot Gold Filled Cases Parts Fix Scrap Gold
    Vintage Pocket Watches Waltham Big Lot Gold Filled Cases Parts Fix Scrap Gold
    Vintage Pocket Watches Waltham Big Lot Gold Filled Cases Parts Fix Scrap Gold
    Vintage Pocket Watches Waltham Big Lot Gold Filled Cases Parts Fix Scrap Gold

    Vintage Pocket Watches Waltham Big Lot Gold Filled Cases Parts Fix Scrap Gold
    UP FOR SALE VINTAGE ANTIQUES BIG LOT OF POCKET WATCHES CASES PARTS FIX ALL USED GOLD FILLED SCRAP AND MATCH MORE PLEASE SEE ALL PICTURES FOR MORE INFO AND CONDITION THANK YOU. The item “VINTAGE POCKET WATCHES WALTHAM BIG LOT GOLD FILLED CASES PARTS FIX SCRAP GOLD” is in sale since Friday, August 31, 2018. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Pocket Watches\Other Pocket Watches”. The seller is “crystalmom79″ and is located in Toronto, Ontario. This item can be shipped worldwide.
    • MPN: Does Not Apply

    Vintage Pocket Watches Waltham Big Lot Gold Filled Cases Parts Fix Scrap Gold

    Tags: , , , , , , , ,

  • antique Comments Off
    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff
    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff
    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff
    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff
    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff
    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff
    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff

    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff
    R othethams key wind pocket watch in silver hunting case. No key and needing service but has no issues other than needing a clean. The item “Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff” is in sale since Saturday, August 25, 2018. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Pocket Watches\Antique”. The seller is “almaclock” and is located in Camden South, NSW. This item can be shipped worldwide.
    • Casing: Silver/Stainless Steel

    Antique Rothethams Silver Cases Key Wind Pocket Watch 1800s Good Balance Staff

    Tags: , , , , , , , , , ,

  • best Comments Off

    Tags: , , , , , , , , , , ,

  • materials Comments Off

    Tags: , , , , ,

  • verge Comments Off
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market

    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market
    For sale is a triple cases tombac material (gold, mercury and brass) covered tortoise shell edward prior verge fusee pocket watch. The watch has been manufactured by Edward Prior watchmaster who is the brother of George Prior. The dial is an ottoman style and in perfect condition. There is no hans on the dial but can be fixed as the main shaft is exsiting and not broken. The 3rd case had been covered with a tortoise shell and it is in perfect condition. There are some of dents on it but this is also a proof of its originality. The shell is not fake or polyester. All the parts are existing in mechanism and needs servicing. The outher case (tortoise case) is 55 mm. The item “VERGE FUSEE TRIPLE CASES POCKET WATCH EDWARD PRIOR FOR OTTOMAN MARKET” is in sale since Wednesday, May 23, 2018. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Pocket Watches”. The seller is “alajoyas” and is located in izmir. This item can be shipped worldwide.
    • Country/Region of Manufacture: United Kingdom
    • Escapement Type: Verge
    • Material: tombac
    • Movement: Mechanical (Hand-winding)
    • Face Colour: White
    • Year of Manufacture: 1850-1859
    • Closure: Full Hunter
    • Display: Analog
    • Brand: edward prior
    • Serial Number: 64329

    Verge Fusee Triple Cases Pocket Watch Edward Prior For Ottoman Market

    Tags: , , , , , , , , ,

  • polished Comments Off
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements

    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements
    We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case is highly polished with thinner. Crew-able bottom frame and. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 14.65 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer another similar case, which is. Engraved in the middle part. Also on offer further. 6 similar type of cases. 2 fully engraved, one with. Crystal and one with both mineral crystals. Engraved and one highly polished. Thickness: 17.50 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “H. POLISHED WRISTWATCH CASES WITH THIN BOTTOM FRAME FOR POCKET WATCH MOVEMENTS” is in sale since Wednesday, January 24, 2018. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
    • Type of Part: Wristwatch Cases
    • Brand: Watches Reborn
    • MPN: Does Not Apply

    H. Polished Wristwatch Cases With Thin Bottom Frame For Pocket Watch Movements

    Tags: , , , , , , , ,

« Previous Entries